• MrJameGumb@lemmy.world
    link
    fedilink
    arrow-up
    100
    arrow-down
    3
    ·
    8 months ago

    It won’t stick together like that if you actually wait for the water to come to a proper boil before you add the pasta

    • strax@sh.itjust.works
      link
      fedilink
      arrow-up
      19
      arrow-down
      37
      ·
      8 months ago

      yes, this is the answer! patience! a proper boil that stays boiling until the pasta is done. no sticking ever. salt and oil are never needed in the cooking water.

      • Godort@lemm.ee
        link
        fedilink
        arrow-up
        70
        arrow-down
        3
        ·
        8 months ago

        You should still be salting your water. It does nothing to prevent the pasta sticking, but it does make it taste better.

          • aubertlone@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            8 months ago

            It’s not the same effect. Then the sauce will be salted, and the pasta will maybe absorb some of that salt.

            But, in my opinion, that’s an inelegant solution.

            I personally do not want any more salt in the pasta sauce than what’s already in there. I do, however, want my pasta to take in a little salt from the water.

            For those reasons, I add a little salt to my water as it’s boiling

        • Tvkan@feddit.de
          link
          fedilink
          arrow-up
          19
          arrow-down
          4
          ·
          8 months ago

          Sea water has a salinity of around 35g/kg.

          No one wants pasta water as salty as the sea - although unsalted water doesn’t sound much more appealing.

        • Nacktmull@lemm.ee
          link
          fedilink
          arrow-up
          4
          arrow-down
          2
          ·
          edit-2
          8 months ago

          I read that quote regularly. Any clue who it originates from? I think it’s a romantic overstatement and does not hold as a general pasta rule. Salty pasta water is needed when you use a sauce or a pesto that has little salt in it. However, when using a particularly salty sauce or pesto, your end result can easily turn out too salty, if you put too much salt in the pasta water. When I make japanese miso-butter pasta for example, I don’t put any salt in the boiling water, because combined with the miso-butter, that would make the end result way too salty.

      • bdonvr@thelemmy.club
        link
        fedilink
        arrow-up
        3
        arrow-down
        2
        ·
        8 months ago

        Pasta water should be as salty as the sea, and it has nothing to do with sticking.

      • erogenouswarzone@lemmy.ml
        link
        fedilink
        English
        arrow-up
        1
        arrow-down
        1
        ·
        8 months ago

        Nooo. You need the perfect amount of water so it reabsorbs it’s own juices. Succulent Cannibalism.

        • underscore_@sopuli.xyz
          link
          fedilink
          arrow-up
          7
          arrow-down
          1
          ·
          8 months ago

          All the oil is doing is helping the pan not boil over while on a high heat as it makes the formation of bubbles at the surface more difficult. So… it kind of helps because you can cook more easily at a high heat but yeah it does nothing for the pasta.

          • yata@sh.itjust.works
            link
            fedilink
            arrow-up
            3
            ·
            8 months ago

            And of course as long as your cooking pot is large enough and you are actually being present, then there shouldn’t be any risk of it boiling over and thus no need for any oil.

        • erogenouswarzone@lemmy.ml
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          2
          ·
          8 months ago

          It eventually gets absorbed by the pasta and makes it creamier. Unless you have too much water.

  • Damage@slrpnk.net
    link
    fedilink
    arrow-up
    89
    arrow-down
    1
    ·
    8 months ago

    I wonder wtf you guys do to your pasta, it’s like the easiest thing to cook… Boil water, add salt, wait for the time written on the box (or just look at it, you’ll see when it’s done).

      • Catoblepas@lemmy.blahaj.zone
        link
        fedilink
        arrow-up
        19
        arrow-down
        2
        ·
        8 months ago

        If you don’t stir the pasta adequately after adding it to the pot that can make it stick together. Source: my husband does this all the freaking time.

        • yata@sh.itjust.works
          link
          fedilink
          arrow-up
          17
          arrow-down
          1
          ·
          8 months ago

          Your stir at the beginning to ensure that each piece of pasta is properly engulfed by water. But after that there really shouldn’t be much need of stirring, the pasta moves around in the water on its own.

          • eezeebee@lemmy.ca
            link
            fedilink
            English
            arrow-up
            5
            arrow-down
            1
            ·
            8 months ago

            Sometimes I just hold the pot handle and swish it around slightly. Never had a problem with sticking. It seems like an infomercial problem.

      • Rambi@lemm.ee
        link
        fedilink
        arrow-up
        11
        ·
        8 months ago

        Also, if the pan isn’t large enough the pasta will stick I think. I say I think because despite having cooked pasta hundreds of times I’ve never had this happen lol

          • Karyoplasma@discuss.tchncs.de
            link
            fedilink
            arrow-up
            2
            ·
            edit-2
            8 months ago

            After cooking the pasta just short of done, many toss them in the sauce pan and let them finish cooking in the sauce for a more even pasta-to-sauce-distribution. Saves you the hassle of portioning your sauce.

          • Nacktmull@lemm.ee
            link
            fedilink
            arrow-up
            9
            arrow-down
            4
            ·
            8 months ago

            That is not true, if you don’t stir at all, pasta will stick. To stir just once or twice is sufficient though.

            • echo64@lemmy.world
              cake
              link
              fedilink
              arrow-up
              2
              ·
              8 months ago

              I have never stirred pasta. I need you to understand this. I’m old, I’ve never once stirred pasta. I’ve made a lot of pasta.

              I wait for the water to boil, I put salt in and question if this even does anything but I do it anyway, I put the pasta in then seven minutes or so later it’s done.

            • Sombyr@lemmy.one
              link
              fedilink
              arrow-up
              2
              ·
              8 months ago

              I have never stirred pasta before, and never had it stick even once. Are you sure you’re waiting for the water to reach a full boil to add the pasta? At that point that air bubbles should be knocking it around enough that you don’t have to bother.

      • LeafOnTheWind@lemmy.world
        link
        fedilink
        English
        arrow-up
        3
        arrow-down
        1
        ·
        8 months ago

        I bought cheap store brand pasta once. That was the only time I’ve ever had noodles stick together.

    • dangblingus@lemmy.dbzer0.com
      link
      fedilink
      arrow-up
      15
      ·
      8 months ago

      Some bad celebrity chef at some point told Americans that you have to put olive oil in the water to prevent sticking.

      Like…no. Just stir it occasionally lol

    • Un4@lemm.ee
      link
      fedilink
      arrow-up
      4
      arrow-down
      6
      ·
      8 months ago

      It’s a shitty pasta fault. Good pasta does not stick, simply boil water add salt put pasta in.

    • Dagwood222@lemm.ee
      link
      fedilink
      arrow-up
      1
      arrow-down
      5
      ·
      8 months ago

      If you throw the pasta on the wall and it sticks, it’s done. If you don’t want to use the wall, use the inside of the microwave’s door.

  • Godort@lemm.ee
    link
    fedilink
    arrow-up
    32
    arrow-down
    3
    ·
    edit-2
    8 months ago

    Cooking pasta correctly is an art, but there are some basic rules to follow if you want consistent results.

    If you want to avoid this situation in particular, take the pasta out just before it’s done along with about 1/4 cup of the water and add both to your sauce and finish cooking the pasta there. You’ll end up with pasta that is cooked perfectly with a sauce that readily adheres to each noodle and no stickyness

        • AgnosticMammal@lemmy.zip
          link
          fedilink
          arrow-up
          8
          arrow-down
          1
          ·
          8 months ago

          The pasta water helps thicken the sauce and makes it more stickier, same way the cornstarch water slurry works.

            • Jakdracula@lemmy.world
              link
              fedilink
              arrow-up
              10
              arrow-down
              1
              ·
              8 months ago

              Well, you only use a bit of the pasta water, it depends how much tomato sauce you’re making.

              Pull out about a cup of the pasta water.
              Dump the pasta. Don’t rinse the pasta, ever.

              Now either slowly pour in a bit of the pasta water into the sauce, stir it, look at it, there should be a sheen. The pasta water makes the red sauce very silky.

              Or, take a frying pan, turn the heat on. Add butter and olive oil. When the butter gets melted, dump diced veggies (or not) into the pan. Cook the vegetables to almost desired tenderness. Dump garlic in for no more than one minute.
              Dump some pasta water in, just a little, and throw the pasta on top. Mix it up. After a short time, 15 seconds maybe, pour the red sauce on top of the spaghetti and veggies, stir.
              After about a minute or so, add pasta water, just a bit. Stir. Taste. Is it shiny and silky? If not add a little more water. Repeat until it’s tasty.

              • Player2@sopuli.xyz
                link
                fedilink
                arrow-up
                6
                arrow-down
                1
                ·
                8 months ago

                Rinsing the pasta is fine for making a cold pasta salad or something like that, removing the free starch stops it from sticking. But for a dish with sauce, definitely don’t rinse.

            • Karyoplasma@discuss.tchncs.de
              link
              fedilink
              arrow-up
              1
              ·
              8 months ago

              The sauce itself should be quite thick before adding the pasta water. I let my bolognese reduce for at least an hour and a half before starting to boil water for the pasta.

      • lolcatnip@reddthat.com
        link
        fedilink
        English
        arrow-up
        11
        ·
        edit-2
        8 months ago

        237 mL. It’s a US unit.

        Edit: I just realized I have a 2-cup measuring cup and I’ve never noticed how weird that sounds until now.

  • DrQuickbeam@lemmy.world
    link
    fedilink
    arrow-up
    11
    ·
    8 months ago

    This shouldn’t happen unless you overcook your pasta. When the water starts boiling, toss in some salt and then the pasta. Wait for length of time on the pasta package. Then remove from heat and drain. If it still gets sticky, buy a better quality pasta.

  • arc@lemm.ee
    cake
    link
    fedilink
    arrow-up
    8
    ·
    8 months ago

    Gluten free pasta is much worse. If you don’t stir it a lot for the first 3-4 minutes it WILL stick together.

  • banneryear1868@lemmy.world
    link
    fedilink
    arrow-up
    6
    ·
    8 months ago

    Never had pasta stick in the boiling water, dunno what some people are doing to their pasta here. Best thing is just taking it right from the boiling water to the sauce before it’s done, add some pasta water in there, last thing toss a bit of olive oil in. Throw basil on top to serve if extra fancy.

  • PlasmaDistortion@lemm.ee
    link
    fedilink
    English
    arrow-up
    8
    arrow-down
    3
    ·
    8 months ago

    About with what others have said, you should not stir it so often or you damage it! Usually I stir it only about twice during the boil.

  • anarchost@lemm.ee
    link
    fedilink
    arrow-up
    4
    ·
    8 months ago

    Noodles are tasty

    That’s all I know, and at this point I’m afraid to learn more

  • Lodespawn@aussie.zone
    link
    fedilink
    English
    arrow-up
    6
    arrow-down
    2
    ·
    edit-2
    8 months ago

    If you cook in 5-10l of water you will dilute the starch and the pasta won’t stick. Also if you mix the sauce through the pasta post cooking and let it rest for 5-10 mins it will soak up the sauce

  • Ookami38@sh.itjust.works
    link
    fedilink
    arrow-up
    3
    ·
    8 months ago

    I have never once oiled my pasta water. I have also never once had my pasta stick. Just add enough water, boil, salt, pasta. Cool til it’s done, I literally never stir the pasta. Test for texture every so often. Drain, save some water for marrying with the sauce better.

  • stolid_agnostic@lemmy.ml
    link
    fedilink
    arrow-up
    3
    arrow-down
    2
    ·
    8 months ago

    It’s really about flavor, not some magic chemistry. The noodles absorb what’s in the water as they cook.