Thanks for actually rising to the challenge, it was actually fascinating to do the research to see how AI is affecting the various industries, and how deeply. I will say that I was able to find direct evidence of replacement in 7/10 of them, 1 was work that is similar and could easily be adapted (telecom line repair), one was an analysis that I think has a lot of good points (plumber), and one was genuinely all about augmenting the capabilities of workers already in place (wildlife conservation/officer).
What companies won’t realize until too late is that paying customers need jobs to pay for things. If AI causes unemployment to rise to some ungodly high, paying customers will become rare and companies will collapse in droves.
I wholeheartedly agree. Functionally, we are going to have to institute a UBI model. It is the only way that society will be able to distribute funds properly when population outpaces jobs due to the exponential growth of populations and the rapidly shrinking landscape of jobs. The corporations are going to need to pay us one way or another.
Damn… nice work on the research! I will read through these as I get time. I genuinely didn’t think there would be much for manual labor stuff. I’m particularly interested in the plumber analysis.
I think augmentation makes a lot of sense for jobs where a human body is needed and it will be interesting to see how/if trade skill requirements change.
I’ll edit this as I read…
Plumbing. The article makes the point that it isn’t all or nothing. That as automation increases productivity, fewer workers are needed. Ok, sure, good point.
Robot plumber? A humanoid robot? Not very likely until enormous breakthroughs are made in machine vision (I can go into more detail…), battery power density, sensor density, etc. The places and situations vary far too greatly.
Rather than an Asimov-style robot, a more feasible yet productivity enhancing solution is automated pipe cutting and other tasks. For example, you go take your phone and measure the pipe as described in the link. Now press a button, walk out to your truck by which time the pipe cutter has already cut off the size you need saving you several minutes. That savings probably means you can do more jobs per day. Cool.
Edit 2
Oil rig worker. Interesting and expected use of AI to improve various aspects of the drilling process. What I had in mind was more like the people that actually do the manual labor.
Autonomous drones, for example, can be used to perform inspections without exposing workers to dangerous situations. In doing so, they can be equipped with sensors that send images and data to operators in real time to enable quick decisions and effective actions for maintenance and repair.
Now that’s pretty cool and will probably reduce demand for those performing inspections (some of whom will have to be at the other end receiving and analyzing data from the robot until such time as AI can do that too.
Autonomous robots, on the other hand, can perform maintenance tasks while making targeted repairs to machinery and equipment.
Again, technologies required to make this happen aren’t there yet. Machine vision (MV) alone is way too far from being general purpose. You can decide a MV system that can, say, detect a coke can and maybe a few other objects under controlled conditions.
But that’s the gotcha.Change the intensity of lighting, change the color temperature or hue of the lighting and the MV probably won’t work. It might also mistake diet coke can or a similar sized cylinder for a Pepsi can. If you want it to recognize any aluminum beverage can that might be tough. Meanwhile any child can easily identify a can in any number of conditions.
Now imagine a diesel engine generator, let’s say. Just getting a robot to change the oil would be nice. But it has to either be limited to a specific model of engine or be able to recognize where the oil drain plug and fill spot is for various engines it might encounter.
What if the engine is a different color? Or dirty instead of clean? Or it’s night, or noon (harsh shadows), overcast (soft shadows), or sunset (everything is yellow orange tinted)? I suppose it could be trained for a specific rig and a specific time of day but that means set up time costs a lot. It might be smarter to build some automated devices on the engine like a valve on the oil pan. And a device to pump new oil in from a vat or standard container or whatever. That would be much easier. Maybe they already do this, idk.
Anyway… progress is being made in MV and we will make far more. That still leaves the question of an autonomous robot of some kind able to remove and reinstall a drain plug. It’s easy for us but you’d be surprised at how hard that would be for a robot.
Thanks for actually rising to the challenge, it was actually fascinating to do the research to see how AI is affecting the various industries, and how deeply. I will say that I was able to find direct evidence of replacement in 7/10 of them, 1 was work that is similar and could easily be adapted (telecom line repair), one was an analysis that I think has a lot of good points (plumber), and one was genuinely all about augmenting the capabilities of workers already in place (wildlife conservation/officer).
I wholeheartedly agree. Functionally, we are going to have to institute a UBI model. It is the only way that society will be able to distribute funds properly when population outpaces jobs due to the exponential growth of populations and the rapidly shrinking landscape of jobs. The corporations are going to need to pay us one way or another.
Damn… nice work on the research! I will read through these as I get time. I genuinely didn’t think there would be much for manual labor stuff. I’m particularly interested in the plumber analysis.
I think augmentation makes a lot of sense for jobs where a human body is needed and it will be interesting to see how/if trade skill requirements change.
I’ll edit this as I read…
Plumbing. The article makes the point that it isn’t all or nothing. That as automation increases productivity, fewer workers are needed. Ok, sure, good point.
Robot plumber? A humanoid robot? Not very likely until enormous breakthroughs are made in machine vision (I can go into more detail…), battery power density, sensor density, etc. The places and situations vary far too greatly.
Rather than an Asimov-style robot, a more feasible yet productivity enhancing solution is automated pipe cutting and other tasks. For example, you go take your phone and measure the pipe as described in the link. Now press a button, walk out to your truck by which time the pipe cutter has already cut off the size you need saving you several minutes. That savings probably means you can do more jobs per day. Cool.
Edit 2
Oil rig worker. Interesting and expected use of AI to improve various aspects of the drilling process. What I had in mind was more like the people that actually do the manual labor.
Now that’s pretty cool and will probably reduce demand for those performing inspections (some of whom will have to be at the other end receiving and analyzing data from the robot until such time as AI can do that too.
Again, technologies required to make this happen aren’t there yet. Machine vision (MV) alone is way too far from being general purpose. You can decide a MV system that can, say, detect a coke can and maybe a few other objects under controlled conditions.
But that’s the gotcha.Change the intensity of lighting, change the color temperature or hue of the lighting and the MV probably won’t work. It might also mistake diet coke can or a similar sized cylinder for a Pepsi can. If you want it to recognize any aluminum beverage can that might be tough. Meanwhile any child can easily identify a can in any number of conditions.
Now imagine a diesel engine generator, let’s say. Just getting a robot to change the oil would be nice. But it has to either be limited to a specific model of engine or be able to recognize where the oil drain plug and fill spot is for various engines it might encounter.
What if the engine is a different color? Or dirty instead of clean? Or it’s night, or noon (harsh shadows), overcast (soft shadows), or sunset (everything is yellow orange tinted)? I suppose it could be trained for a specific rig and a specific time of day but that means set up time costs a lot. It might be smarter to build some automated devices on the engine like a valve on the oil pan. And a device to pump new oil in from a vat or standard container or whatever. That would be much easier. Maybe they already do this, idk.
Anyway… progress is being made in MV and we will make far more. That still leaves the question of an autonomous robot of some kind able to remove and reinstall a drain plug. It’s easy for us but you’d be surprised at how hard that would be for a robot.