I have tried both and a bunch of others with a laptop with nVidia and Intel and have had a range of experiences.

Anything Ubuntu based worked out of the box but any significant deviation from the exact current standard made things less stable. Changing WM/DE was not really possible and troubleshooting was opaque. Snap was also a nightmare of broken packages and bad update processes.

Manjaro looked really nice and had that lovely Arch flavour, but it is not really Arch, more Arch adjacent. Lots of things work similarly but lots of things break in bad ways. They have had numerous issues with security, bad updates, and general poor practice.

Pop is cool, I like it, but just not a good fit for me. Cosmic is a great environment but I like to tinker too much and while the team is great and do good work it is just not the same kind of defaults I like.

EndeavourOS is my current pick. It is Arch with sane defaults. It comes prebuilt with a DE configured, backups using BTRFS snapshots, a handy updater and package management config, some cool apps built in, and it is very performant. The guides for hardware video acceleration worked first time for me which has never happened before, normally that is a major pain and takes a few days to get sorted on a fresh install. Graphics performance is awesome, same with built in OOM protection. That said, make sure you have enough RAM. I had 8gb in my laptop and ended upgrading to 32gb after a number of failed builds and messing around with swap to get things to finish. If you have less than 16gb RAM I would recommend upgrading.

Whatever you choose, I would recommend trying a few things before settling down. The right fit is right for today and may change, so try things again in the future if you feel uncomfortable. Also do what works for you, not for anyone else. If you don’t like Arch you are not obligated to use it, same with Ubuntu, Debian, Fedora, etc. Keep the fun of it and play around, maybe just boot up a few live environments and see if something tickles you. I hear good things about Hannah Montana Linux.

My understanding is you make fewer but more replicable mistakes. If you use a wire you have to trace it, keep the length consistent for timing reasons, use very consistent soldering technique, and ultimately you have a hard time tracing issues. With a homemade PCB you generally do get what you ask for in terms of circuitry. Traces are the right length, right thickness, right spacing, and if not then the whole board is similarly impacted, so it is obviously broken or not broken. If you mess up your design then you have a problem, but if you did the process right and you have a valid design then it works.

That all said, homemade PCB is a large time sink and modern PCB manufacture is so cheap and fast it doesn’t make sense to do at home for the most part. You can literally get a complex board faster by ordering it from halfway around the world and having it posted than making it yourself. I would say it is a good learning exercise, not a good manufacturing or prototyping practice.

The payment of hush money would have counted as a campaign contribution regardless of the source. If he paid it personally it would have been reportable. If Cohen paid it it would have been reportable. If a third party paid it it would have been reportable.

The reason it would have been reportable is because it provided benefit to the campaign. Covering up negative news is a benefit to the campaign, so if he paid it himself it would still have been a campaign contribution he would have to report.

By covering up the payment he is taking or making a campaign contribution in violation of FEC rules. By suppressing the story of his affair with Stormy Daniels he is contributing to his campaign and failure to disclose makes this a crime.

The fact that he committed a crime by failing to report a campaign contribution is what makes the payment itself part of a felony rather than a misdemeanor. In New York law they do not have to prove the specific electoral crime itself for this set of falsifications of business records to be related to a felony level crime and therefore felonious. The jury instructions approved by the judge specifically say that the jurors can find that he violated one of several options of law for raising this to a felony.

To be clear, it is not a hush money trial. It is an election interference trial. Hush money is not actually criminal in and if itself, the fact that it was used in relation to influencing an election is what makes it a crime. It is election interference.

I agree with many of these points, but have two thoughts here. First, the same was true of many items being produced in China in the past, but quality control got better and honestly most of the products you can buy for a reasonable price are partly or wholly made in China. Second, Tesla is a good example of a US based company with many of the same issues. Loose panels, door handles that fall off, accelerators that get stuck, and so on. Bad engineering is not only available in Mandarin.

I hope they can produce a good quality electric car and help accelerate the transition.

Yeah, meds are not the solution to all problems. Some meds can at some times be useful for some people, but it is not appropriate to just blanket the population with benzodiazapines and consider the population to be mentally healthier. All sort of other stuff like improving social connection, reducing working hours, building skills, and so on can do a lot more to reduce anxiety and depression, but where is the funding for a local community garden or woodworking class?

Australian healthcare is actually pretty amazing. I had endocarditis last year and had two collapsed lungs with my blood oxygen plummeting and no clear reason for the infection. The bacteria ate one of my heart valves so my heart had to do 4 pumps to have the effect of one, pushing my heart rate up to around 140 bpm while sleeping. I was flown from my regional town to the best hospital for the job and had an emergency valve replacement. I was up and walking 2 days later and I was flown home a couple of weeks later. I now take Warfarin and will for the rest of my life, along with a beta blocker. My biggest healthcare costs involved with this whole thing is my monthly medication cost of about $30 from 5 prescriptions including ADHD medications.

That all said, mental health care is not as good here as it used to be nor as it should be. We had a conservative government for 12 years and they absolutely gutted the mental health care system. They cut funding for extremely effective programs and did some real harm to vulnerable people (if interested look up robodebt). So yes, mental health is not great here. It is way better than in the US or in the UK but it is not in line with best practice research.

The fact that we can do better does not eliminate how we we do. I didn’t die from something that should have killed me, and this is the second time I have had a really major injury that required surgeries and so on. Well, third technically. Still, I have never paid a cent at the time of use for any medical care and I have paid for the medical care of others with my taxes. Am I coming out ahead of my costs? I hope not to be honest. I hope I have contributed more than I have cost the system because I care what happens to other people. I hope I have paid my way but I will be sure to honestly file my taxes every year knowing the system I am paying in to is the same one that has saved my life. Again. Man I am stupid.

Have a look at this link

https://linuxways.net/mint/setup-wine-linux-mint-21/

It has steps for enabling 32 bit support, around step 2 enables and step 3 installs wine again after. You need to go through the wine install again after enabling 32 bit support (i386). If you don’t get all the packages with :i386 at the end remove wine and then install again.

With the upload, if it isn’t bittorrent it may be corrupted without being checked. Maybe look for an md5sum and confirm you have the file as expected. If the md5sum checks out you are sorted, if not you will at least know. That said it is as you say very unlikely to be the file, much more likely the libraries. Let me know how you go.

OK, so a few possible starting points. It looks like you are running a 32 bit programming but may not have all the 32 bit libraries installed. This may be referred to as multilib or similar, but you need the 32 bit versions to run 32 bit software properly.

Second, if the above doesn’t solve it you may be having the same issue I had with Arcanum. I had taken a rip many years back and it had been corrupted so it would segfault like yours is. The solution was to find an alternate image of the disk which was clean and using that.

Good luck

Working for a VoIP company in the early 2010s I rm -rf’d the /bin/ directory. As root. On a production server. On site.

I ended up booting from my phone (android app for iso booting) then manually coppied over the files from another machine. Chrooted and some stuff was broken but rebuilding from the package manager reinstalled everything that was missing. Got the system back up in around 40 mins after that colossal screw up. Good fun and a great learning experience. Honestly, my manager should not have had me doing anything on a root shell with no training.

Do you want a grilled human? Because that’s how you get grilled human.

My cat only eats grass when he wants to vomit. He will clean himself, get too much hair in his stomach, then yowl to go outside. He then eats grass, vomits, and is chill. When I am more on top of brushing him this happens less, but if I neglect his brushies he needs to purge the hair.

Lol, my cat eats a diet of chicken, prawns, some beef, and organs like liver, heart, kidney, and brain. He is extremely healthy and does not look his age (13). He started on kibble but we transitioned him to meat because of hairball and general health issues. His teeth are clean and strong, his coat is shiny, and his eyes are clear.

Honestly, cats are predators. They eat meat. Feed a cat mice and you are close to what mine eats. It would be really strange if they were ok eating rice, corn, and brocoli.

In Australia we have a robust and fast paper voting system administered by the Australian Electoral Commission. We get most results in the evening of election day with only really close races being a couple of days out. There is solid chain of custody on paper ballots and having been used for over a century we have all the kinks worked out.

The USA has about 330 million people, we have about 25 million. The voting population of each is smaller, but it is a much larger percetage of our population due to compulsory voting. If we can do it with less than 10% of the population it could be done there with the same ratio no worries, just assume out country was a state and you can see it can work.

Paper is safe and secure. It is well understood and all the hack and hijinks have been worked out. If you ask experts in IT if they think voting should be dine electronically they answer hell no without much debate.

For the software side I would recommend Linux Mint as a great simple starter distro with good support and a nice community. The overall design paradigm is about maintaining familiarity while also making sane defaults and simplifying processes. Because it is Ubuntu based it is also easy to get documentation and support because what works for Ubuntu also works for Mint.

For hardware it really depends on your budget and locality as well as use case. Laptops vary much more country to country than you may think, so it may be worth thinking about what is local to you. For example, I live in Australia so System76 is a bad choice here, same with SlimBook (I think that is the name, European KDE laptop that advertises with that French(?) YouTuber, they don’t ship here.

Also, when looking at laptops the RAM configuration is important. If you have two RAM slots but only one RAM stick you will have really slow memory access. This will bottleneck for both the CPU and GPU if you are using both at the same time, say during gaming or doing AI work. Swapping out the single stick for a matching pair or just adding one more stick that matches what it already has will let both ports work together, making everything faster. Also when I say matching I mean in terms of size and speed. If you put 3200MHz and 2400MHz in the system at the same time the 3200MHz won’t just down tune to match, they will both go slower as far as I am aware. Best to match not only the speed but if possible the brand and ideally model, there are lots of little differences between RAM sticks and honestly it has never been worth the trouble in my experience to have mismatched sticks, I just replace with a matching pair.

Damn autocorrect, yes, absolutely, thanks for that

Yeah, they mean in terms of the limitations if silicone, specifically the gate sizes and other properties. If the whole chip is silicone then you are bound by those limitations, but by changing to carbon things can be smaller and more efficient, allowing better computation with less waste heat.