Hey everyone, I’m building a new server to run Jellyfin (with a few other services like Pi-hole) and I’m stuck on GPU or CPU transcoding.

My main concern is smooth 4K HDR transcoding for 1 stream. I’ve been reading mixed advice online – some people say a strong CPU with good single-core performance can handle it, while others recommend a dedicated GPU.

Should I focus my budget (~$1000AUD/$658USD) on a good CPU, or spend some of it on a dedicated GPU?

  • Diplomjodler@lemmy.worldEnglish
    7·
    2 months ago

    I’ve been trying to get this to work for weeks now. No dice, so far. Anybody know any useful guide on setting it up for a docker installation? Or does it only work if you install the.deb? I use Mint, BTW. Server is a Dell with a 9th gen i5.

    • SmallBorg@lemm.eeEnglish
      4·
      2 months ago

      I also struggled to get it to work with an Intel Celeron N5100. To get it to work I followed the instructions in the Jellyfin documentation. It seems like there are some additional steps for some versions of Intel CPUs, could it be that yours is affected? After enabling “Low-Power Encoding” it worked as expected.

        • SmallBorg@lemm.eeEnglish
          4·
          2 months ago

          Yes, I have it installed as a Docker container in a Debian 12 machine. My Docker compose file is something like this:

            jellyfin:
    container_name: jellyfin
    image: jellyfin/jellyfin
    group_add:
      - "105" 
      - "44"
      - "102"
    devices:
      - /dev/dri/renderD128:/dev/dri/renderD128
      - /dev/dri/card0:/dev/dri/card0

          The group numbers were obtained following Jellyfin’s documentation.

          You also need to configure Jellyfin from Menu > Playback. In “Hardware acceleration” I selected “Intel QuickSync (QSV)”. I have selected all but AV1 (not supported by my CPU) from “Enable hardware decoding from:” and from “Hardware encoding options:” I have enable all 3 of them.