Hello fellow Linux gamers!

I’ve recently switched to nobara for gaming. I’ve had no real issues so far and it’s all running smoothly! Queue my Xbox controller.

A year or two ago I bought an Xbox wireless control ( 2020 version according to the order ). Now I wanted to use the controller, but it is not being detected. The light keeps blinking. On nobara itself it looks like it mounted the dongle as a USB Stick.

That would explain why the controller isn’t connecting.

How would I best go at tackling this? Any tips? I’ve already ran the following command:

nobara-controller-config

This installed some drivers and required a reboot ( which I did ).

Thanks in advance for any guidance or tips!

  • fluckx@lemmy.worldOP
    link
    fedilink
    English
    arrow-up
    1
    ·
    6 months ago

    Those are the steps I took as described in the README.md. Nobara added a custom command called nobara-controller-config which installs the xone drivers. I guess something must have gone wrong there that the dongle firmware was missing. https://nobaraproject.org/docs/xbox-controllers/known-issues/

    I might have just missed it.

    Running the third step of the README.md leaves me with this output:

    sudo ./install.sh 
    Driver is already installed!
    

    I assume there is no xone-get-firmware.sh file in the xone directory as a result.

    All is well that ends well :)

    • Nibodhika@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      arrow-down
      1
      ·
      6 months ago

      Read what the other guy told you, see if your distro has a package for this instead of following the readme file, otherwise you’ll need to run that every time your kernel updates. There’s a reason we recommend people to use the package manager and to forget the windows mentality of installing things by random means.

      • fluckx@lemmy.worldOP
        link
        fedilink
        English
        arrow-up
        2
        ·
        6 months ago

        The Nobara-controller-config command is the is way to install it as far as I can tell by the docs. I’ll try reinstalling it that way and see if it recognises it by default.

        I agree that the package manager way is the preferred way to go. I fell back to the github repo because it didn’t work :)

        • TheSun@slrpnk.net
          link
          fedilink
          English
          arrow-up
          1
          ·
          6 months ago

          Probably need to uninstall the xone driver you already installed from that link. Then open the welcome screen again (super key + type welcome, should be there) and there’s an option to install the xone and xpadneo drivers already setup for nobara on one of the tabs there.

          • fluckx@lemmy.worldOP
            link
            fedilink
            English
            arrow-up
            1
            ·
            6 months ago

            Yeah I didn’t reply anymore, but I did an uninstall, removed the dongle, rebooted, reinstalled it, rebooted, plugged in the dongle and it instantly worked.

            I must’ve done something wrong the first time #pebcak