I’m pulling my hair out over this. I’ve got a proxmox homelab, an LXC running technitium installed from TTeck’s script.

The DNS server is also doing DHCP for my network. I have an authoritative zone for ‘.lan’

I can get NS, SOA, TXT records from the DNS server, but no A records! The DNS query logs show that it gives an answer, and if I am on the DNS server itself I get an answer, but no other machines on the network hear the reply.

I think this means the DNS server is working properly. There are no FWs in the way as I can resolve other types.

Where else can I look, or how can I diagnose this? I am completely at a loss.

  • truthfultemporarily@feddit.orgEnglish
    6·
    4 hours ago

    Here is how I would diagnose (I’m assuming you have Linux / WSL on a client)

    1. Check the DNS record is actually set (yes do it again)
    2. Do these steps on the client:
    3. dig $domain check which server answered
    4. dig a $domain should give a record
    5. dig a $domain @server to make sure you’re querying the right server

    If none work, probably network issue (DNS boind to wrong IP, firewall, etc)

    If 3 and 5 work but 4 doesn’t, your DNS isn’t authorative.

    If only 5 works DNS settings on the client is wrong.

    • Bluesheep@lemmy.worldOPEnglish
      2·
      4 hours ago

      Thanks for giving it some thought!

      I have been testing using dig @192.168.0.249 study.lan

      3, 4, and 5 work for TXT, NS and SOA but doesn’t work for A records. I think this rules out a simple network issue?

  • hemmes@lemmy.worldEnglish
    1·
    4 hours ago

    How exactly are you testing this from your client, with ping? What are you using to query the DNS?

    If you run nslookup from the client

    • Does the ‘server’ command return the correct DNS server?
    • Does <A-record>.lan return the expected record?

    I’m assuming you’ve run ifconfig to verify your client’s NIC has been assigned the correct DNS via DHCP?

    • Bluesheep@lemmy.worldOPEnglish
      1·
      4 hours ago

      Thanks for replying, I appreciate the response.

      I’m running dig @192.168.0.249 study.lan from my client (a MacBook).

      If I run ‘dig @192.168.0.249 study.lan TXT’ I get a correct response (I have added a txt record)

      If I run ‘dig @192.168.0.249 lan SOA’ or ‘NS’ I correctly get the records for the zone.

      I think this eliminates the possibility of it being a routing error?

    • Bluesheep@lemmy.worldOPEnglish
      1·
      4 hours ago

      Thanks for the suggestion, I’ll grab a cap to check.

      I’m running tcpdump -i any port 53. I can see the outbound request but not the reply. Will the cap show me anything more?